Scaling Up DNA Origami Lattice Assembly

The surface-assisted hierarchical assembly of DNA origami nanostructures is a promising route to fabricate regular nanoscale lattices. In this work, the scalability of this approach is explored and the formation of a homogeneous polycrystalline DNA origami lattice at the mica-electrolyte interface over a total surface area of 18.75 cm² is demonstrated. The topological analysis of more than 50 individual AFM images recorded at random locations over the sample surface showed only minuscule and random variations in the quality and order of the assembled lattice. The analysis of more than 450 fluorescence microscopy images of a quantum dot-decorated DNA origami lattice further revealed a very homogeneous surface coverage over cm² areas with only minor boundary effects at the substrate edges. At total DNA costs of € 0.12 per cm², this large-scale nanopatterning technique holds great promise for the fabrication of functional surfaces.     

La2-xBixCuO4阴极材料的合成与电化学性质

采用甘氨酸-硝酸盐法合成了固体氧化物燃料电池阴极材料La_2-xBi_xCuO₄（x=0、0.05、0.10）,并利用X射线衍射（XRD）对材料的物相进行分析。结果表明,La_2-xBi_xCuO₄形成单一的类钙钛矿结构氧化物,且晶胞体积随着铋掺杂量的增加而增大。在950℃烧结24 h过程中,La_2-xBi_xCuO₄不与电解质Sm_0.2Ce_0.8O_1.9（SDC）发生反应,表明这种电解质材料具有良好的高温化学相容性。电导率测试结果表明Bi的掺入显著提高了材料电导率。程序升温脱附测试结果表明,铋的掺杂显著增强了材料的表面氧吸附能力。不同氧分压下的交流阻抗谱测试结果表明,La_1.9Bi_0.1CuO₄阴极在700℃空气中的极化电阻为0.26 Ω·cm²,以电解质SDC支撑的单电池NiO-SDC/SDC/La_1.90Bi_0.10O₄在700℃的最大输出功率密度为308 mW·cm^-2,电极反应的速控步骤为氧分子的扩散与表面吸附过程。     

水洗和回烧工艺对高镍三元材料LiNi0.88Co0.07Al0.05O2微观结构及电化学性能的影响

以镍钴氢氧化物、异丙醇铝为原料,采用水解法合成三元前驱体Ni_(0.88)Co_(0.07)Al_(0.05)O_2,再与锂盐混合烧结得到正极材料(TEM)、X射线光电子能谱(XPS)、能量色散X射线谱(EDS)和恒电流充放电测试等对样品的晶体结构、微观形貌、元素价态以及电化学性能进行表征。研究表明,料液比1∶25、水洗3次、600℃回烧2 h合成的LiNi_(0.88)Co_(0.07)Al_(0.05)O_2具有较优的综合电化学性能,其在0.2C的放电比容量达207.6 mAh·g~(-1),首次充放电效率为84.8%,1C放电比容量为192.0 mAh·g~(-1),循环100周后,材料的放电比容量仍有148.0 mAh·g~(-1),容量保持率达到77.1%。     

Design and Construction of 3D Porous Na3V2(PO4)3/C as High Performance Cathode for Sodium Ion Batteries

An easy and delicate approach using cheap carbon source as conductive materials to construct 3D sequential porous structural Na3V2(PO4)3/C(NVP/C)with high performance for cathode materials of sodium ion battery is highly desired.In this paper,the NVP/C with 3D sequential porous structure is constructed by a delicate approach named as“cooking porridge”including evaporation and calcination stages.Especially,during evaporation,the viscosity of NVP/C precursor is optimized by controlling the adding quantity of citric acid,thus leading to a 3D sequential porous structure with a high specific surface area.Furthermore,the NVP/C with a 3D sequential porous structure enables the electrolyte to interior easily,providing more active sites for redox reaction and shortening the diffusion path of electron and sodium ion.Therefore,benefited from its unique structure,as cathode material of sodium ion batteries,the 3D sequential porous structural NVP/C exhibits high specific capacities(115.7,88.9 and 74.4 mA·h/g at current rates of 1,20 and 50 C,respectively)and excellent cycling stability(107.5 and 80.4 mA·h/g are remained at a current density of 1 C after 500 cycles and at a current density of 20 C after 2200 cycles,respectively).     

Multilayer Porous Vanadium Nitride Microsheets Anodes for Highly Stable Na-ion Batteries

Sodiumion batteries(SIBs)have attracted intensive attention as promising alternative to lithium-ionbatteries(LIBs)for large scale energy storage systems because of low cost of sodium,similar energy storage mechanism and the reasonable performance.However,it is still a great challenge to search and design a robust structure of anode materials with excellent cycling stability and high rate capability for SIBs.Herein,multilayer porous vanadium nitride(VN)microsheets are synthesized through a facile and scalable hydrothermal synthesis-nitrogenization strategy as an effective anode material for SIBs.The multilayer porous VN microsheets not only offer more active sites for fast Na+insertion/extraction process and short diffusion pathway,but also effectively buffer the volume change of anode due to more space in the multilayer porous structure.The large proportions of capacitive behavior imply that the Na+charge storage depends on the intercalation pseudocapacitive mechanism.The multilayer porous VN microsheets electrodes manifest excellent cycling stability and rate capability,delivering a discharge capacity of 156.1 mA·h/g at 200 mA/g after 100 cycles,and a discharge capacity of 111.9 mA·h/g at 1.0 A/g even after 2300 cycles with the Coulombic efficiency of nearly 100%.     

MOFs/水凝胶复合材料的制备及其应用研究

金属有机框架(MOFs)具有大量的孔隙结构和活性位点,在气体吸附、催化、医疗等领域均发挥了巨大的作用。MOFs是晶体粉末,具有脆性较大、在水中易分解和不易回收等缺点,从而限制了其应用。通过MOFs与柔性高分子的复合,特别是与水凝胶的复合,极大地改善了复合材料的柔顺性、可回收和可加工性等特性,进一步拓宽了MOFs的应用领域。本文详细阐述了基于水凝胶MOFs原位生成法、MOFs /水凝胶同时生成法和水凝胶包裹MOFs法等三种不同方法制备MOFs/水凝胶复合材料的研究进展,并对上述三种制备方法的特点及其产物特征进行了总结,进一步归纳了复合材料在生物医药、催化、废水处理和气体吸附等领域的应用。最后,对MOFs/水凝胶复合材料制备方法的改进和复合材料应用前景进行了深入讨论和展望。     

中性或弱酸性体系下锌基水系电池负极材料研究进展

锌具有原料丰富、质量轻便、金属导电性与延展性好以及理论比容量高等优势,可以作为绿色可充电电池的理想电极材料。其中,以中性或弱酸性水溶液为电解质、锌为负极的锌基水系电池具有安全性高、电池材料廉价无毒、制备工艺简单、环境友好等特点,在储能和动力电池领域具有极高的应用价值和发展前景。但电池充放电过程中伴随的锌枝晶、析氢、腐蚀、钝化等问题限制了其实际应用。本文综述了锌基水系电池负极存在的问题及当前的解决策略,并对其负极研究发展方向进行了展望。     

Graphdiyne:A Versatile Material in Electrochemical Energy Conversion and Storage

Graphdiyne(GDY),which is composed of sp2-/sp-hybridized carbon atoms,has attracted increasing attention.In the structure of GDY,the existence of large triangular-like pores,well dispersed electron-rich cavities as well as a large π-conjugated structure endows GDY with a natural bandgap,fast electron/ion transport,and tunable electronic properties.These unique features make GDY competitive in areas of gas separation and capture,electronics,detectors,catalysts,biomedicine and therapy,and energy-related fields.Benefiting from the facile synthesis method,various GDY structures and GDY-based composites have been successfully prepared and show great potential in the practical application of energy storage and catalysis areas.Here,this review aims at providing a timely and comprehensive update on the preparation and application of GDY materials.The current development of GDY materials in various electrochemical fields especially in energy conversion,energy storage,and catalysis is mainly summarized.Moreover,the potential development prospects are also discussed.     

BC/CoNi2S4@PPy柔性复合电极材料的制备及电化学性能

本文采用溶剂热、原位聚合和真空抽滤相结合的方法制备了用于超级电容器的细菌纤维素/镍钴硫化物/聚吡咯(BC/CoNi₂S₄@PPy)柔性电极材料,通过X射线衍射、场发射扫描电镜、红外光谱、氮气吸脱附、拉伸强度和接触角表征了材料的形貌结构、组成、机械性能和亲水性,并采用循环伏安法和恒电流充放电测试了复合材料的电化学性能。结果表明,表面含氧官能团丰富的BC纤维网络结构对氧化还原活性物质CoNi₂S₄的生长和导电聚合物PPy的分布具有引导作用,CoNi₂S₄均匀分布在BC网络中,且PPy均匀包覆在BC纤维和CoNi₂S₄纳米球表面构成具有丰富孔隙结构的三维导电网络,使得该复合材料具有较好的机械性(抗拉强度达28.0±0.1 MPa)、亲水性(对6 mol·L^-1 KOH的瞬间接触角为43.6°)及良好的导电性。该电极材料在1 A·g^-1下比电容高达2670 F·g^-1,充放电循环10000次后比电容的保持率为82.73%,且经1000次反复弯曲后电化学性能保持不变。此外,将其与活性炭组成的非对称超级电容器,在1 A·g^-1下比电容为1428 F·g^-1,最高能量密度和功率密度分别达49.8 Wh·kg^-1和741.8 W·kg^-1。     

熔盐法合成电化学性能优异的富锂层状正极材料Li_(1.5)Ni_(0.25)Mn_(0.75)O_(2.5)

采用氢氧化物共沉淀和熔盐法相结合的方法制备得到了电化学性能优异的富锂锰基Li_(1.5)Ni_(0.25)Mn_(0.75)O_(2.5)正极材料。借助X射线衍射(XRD)分析、扫描电镜(SEM)、感应耦合等离子体原子发射光谱(ICP-AES)、X射线光电子能谱(XPS)、电化学阻抗谱(EIS)和恒电流充放电测试等表征手段对材料的颗粒形貌、晶体结构和电化学性能进行了系统研究。XRD结果表明该材料具有完善的α-NaFeO2层状结构(空间群为R3m)和较低的Li~+/Ni~(2+)阳离子混排。电化学性能测试表明该材料的首次不可逆容量损失较小,且倍率性能和循环稳定性能十分优异。具体而言,在2.0~4.8V,0.1C时的首次不可逆容量损失为50mAh·g~(-1)(首次库伦效率84%);在10C时的放电比容量还能达到102mAh·g~(-1);在0.5C下循环100次后,放电比容量为205mAh·g~(-1)(容量保持率90%)。